AUDIO TUNING TOOLS

A preloaded USB with ALL the SMD test tracks you need, including all manuals and software!   What does it come with? - DD-1 - DD-1+ - CC-1 - Manuals + Software!

These are NEW test leads for the SMD Tools! Device Selection: DD-1 CC-1 DD-1+ AMM-1

CONNECT AMPLIFIERS TO YOUR FACTORY RADIO The typical purpose of the HLC-2 is to bridge the gap between factory audio systems and aftermarket audio amplifiers.  With it's ability to accept up to a 40V...

The purpose and benefit of the D’Amore Engineering / SMD Crossover Calibrator. Most modern car audio amplifiers have a built in crossover on the side. Usually, it will start at 30hz and have a huge...

The purpose and benefit of the D’Amore Engineering / SMD Distortion Detector. The purpose of this tool is to enable the installer to set the gain of an audio amplifier to match the source unit’s...

The purpose of this tool is to enable the installer to set the gain of an audio amplifier to match the source unit’s output level, accurately and quickly. It can also be useful for detecting...

The purpose and benefit of the D’Amore Engineering / SMD Distortion Detector. The purpose of this tool is to enable the installer to set the gain of an audio amplifier to match the source unit’s...

Some uses of the D’Amore Engineering / SMD IM-SG+ (Impedance Meter / Signal Generator PLUS). Precision AC Impedance Meter - Frequency range: 10hz-20khz All New Auto-lock feature does the stopping...

The purpose of this tool is to enable the user to: Measure True Amplifier Power output into any load reactive or resistive Measure Common DC voltages Measure DC voltage drops during quick transients...

If you are familiar with our original DD-1 tool, the new / additional features of the DD-1+ are: Fully variable gain overlap setting from 0.0dB to 15.0dB Ability to check the gain overlap setting of...

The purpose and benefit of the D’Amore Engineering / SMD Distortion Detector. The purpose of this tool is to enable the installer to set the gain of an audio amplifier to match the source unit’s...

This includes a DD-1+, CC1, IM-SG.